EKK Technologies

If you have a stress washer enterprise you will eventually require to change out or repair the pump. Specially designed for offer the dimensional interchange-capability and replacement of the diverse brands of mech.seals. than in millimetres and inches. The mechanical seal configuration can market loss of liquid from the mechanical seal. Valmet mechanical seals give optimal sealing for increased availability and lowered upkeep. All seals in the SealMax loved ones are optimized for each and every application.

centrifugal pump seal 

As the seal is very sensitive to solid particles, the barrier water which feeds the seal have to be very clean. A barrier fluid is any gas or liquid which is utilised to pressurise a double mechanical seal. It have to be compatible with the process, generally non-toxic and a good lubricant.

When employing compressors, pumps and other systems, the tightness of the entire method is vital. The sealing systems are a classic weak point that you can optimally compensate with the matching mechanical seal from the range of Billi Dichtungstechnik GmbH. We offer you mechanical seals for numerous applications and industries, with which you can equip your self functionally or persuade your customers as a repair service unrestricted.

Mechanical seals are employed with a lot of approach fluids. Each and every fluid has diverse lubrication qualities, but a thin, lubricating film at the sealing interface is often needed. A film that is too thick will boost leakage and could allow particulate amongst the faces, which will boost wear from abrasion. A film that is also thin will create heat and lead to materials to degrade. Maintaining the sealing interface cool and clean will market longer seal life.

The standard components of an finish-face mechanical seal could be installed directly onto the shaft but a well-known approach is to pre-assemble the elements into some sort of package for ease of installation. 3 four When the components are pre-assembled onto a sleeve and gland plate, the total assembly is named a cartridge seal. This comprehensive assembly can be simply slid onto the shaft and bolted in location therefore reducing the prospective for installation errors. Some cartridge seals use typical element seal parts whereas other cartridge seals might use particular objective components. API 682 specifies that only cartridge seals are acceptable to the common.

Mechanical Seal is an updated solution rather of rope in traditional model pumps. Due to frequent leakages in rope assembled pump the pump casing and all other components disturbed significantly. We can adjust old model of rope packed pump into mechanical seal pump, by modifying sleeve, gland and seal.

Leave a Reply

Your email address will not be published. Required fields are marked *